Introduction of briquette press:

1. This briquette press adopts an automatic constant temperature device, which has stable working performance under the set temperature and has the advantages of reasonable structure, simple operation, maintenance, etc. The solid bar produced by this machine is easy to ignite after carbonization, has a high calorific value (more than 20% higher than that of ordinary wood), has fewer pollutants, and has a large specific gravity, which is convenient for storage and transportation, and can make full use of crop residues to achieve changes. Turning waste into treasure can alleviate the contradiction between my country's agricultural and forestry energy shortage(roller press briquetting machine).

2. Briquette press is also called a wood powder forming machine. Its products can be divided into sawdust rod making machine, rice husk rod making machine, sawdust rod making machine, etc. This briquette press is the main forming equipment for producing machine-made charcoal. briquette press machine can remove the granular (length ≤ 5mm, diameter ≤ 3mm) wastes such as bamboo, wood, husk, and straw (except rice straw and wheat straw) with a moisture content of less than 12%, without adding any binder. High temperature and high-pressure process, extruded into the solid rod with center hole(biomass charcoal making machine).

Technical information of briquette press:

Working principle of briquette press:

The briquette press machine is made of sawdust, crop straw (corn straw, soybean straw, sorghum stalk, cotton stalk, rape stalk, peanut seedling, sunflower stalk), rice husk, grass, shrub branches, bamboo, and woodcut ends, feed heads, sugarcane Slag, and other raw materials are used as raw materials. After being pulverized by a sawdust pulverizer, a high temperature and high-pressure zone are formed under the action of a screw propeller and a heating ring, and the loose raw materials are processed into hollow rods. The product has high density, small volume, and good flammability, and can replace firewood and coal. Generally, the outer diameter of the product is 50-80mm, the hole diameter is 15-20mm, and it is a hollow quadrangular or hexagonal column. It can also be made into spherical, granular, and honeycomb shapes(sawdust press machine).

Usage and Features of briquette press:

1. This product has the characteristics of reasonable design, reliable manufacturing quality, simple structure, convenient operation, small size, less lａnd occupation, labor-saving, and power saving.

2. The designed fully automatic control electric heating device can randomly adjust the dry and humidity of the material to ensure the stability of the discharging and forming, and improve the work efficiency.

3. The main parts of this product are made of wear-resistant materials after special treatment, so it can be continuously pressed and produced and durable.

4. briquette press machine is suitable for pressing and molding various biomass raw materials, with low energy consumption and high production efficiency.

5. Change the three bearings of the old movement to four, which increases the stability and durability of the machine.

6. Change the old-fashioned oil-applied lubrication to oil-immersed lubrication. As long as there is no shortage of oil, it can be used for many years.

7. Increase the pitch to increase the amount of feed, thereby greatly increasing the output.

8. The structure of the forming cylinder is improved, the friction between the machine and the raw material is reduced, and the density of the mandrel is increased.

Advantages of briquette press machine:

1. Change the three bearings of the old-fashioned movement to four, which increases the stability and durability of the machine and reduces the abnormal noise during the operation of the machine.

2. Change the old-fashioned oil lubrication to oil immersion lubrication, as long as there is no shortage of oil, it can be used for many years.

3. Increase the pitch to increase the amount of feed, thereby greatly increasing the output.

Fourth, the structure of the forming cylinder is improved, the friction between the machine and the raw material is reduced, and the density of the mandrel is increased.