Application of sawdust briquette press:

The sawdust briquette press is also called charcoal briquette machine, or wood chip briquette machine. It is used to process sawdust, straw, rice husk, and other materials. It belongs to energy recycling equipment. Therefore, the pressed wood sticks have high heat and no pollution when burning, and the finished sticks can be round, square, etc., and then put into carbonization furnaces and carbonization kilns for carbonization, and then sold to the market.

Technical information of sawdust briquette maker:

Working principle of sawdust briquette maker:

1. The sawdust briquette press is supporting equipment for processing machine-made charcoal. Around us, wood, branches, miscellaneous wood, waste wood, and other wood are crushed and processed into sawdust by the sawdust briquette maker, and the sawdust is processed into charcoal through the small briquette machine.

2. The sawdust briquette press is mainly composed of shell, lining plate, hammer, screen, large shaft, bearing, fan, pipeline, dust removal, dust removal bag, etc.

3. The sawdust briquette maker starts the motor or diesel engine, the belt transmission drives the main engine wheel to rotate, the main engine wheel is connected with the large shaft, the hammer on the large shaft repeatedly rotates to cut the wood, and the wood is processed into sawdust after repeated rotation, and the sawdust is removed from the screen. After filtering, the size of the screen can control the size of the discharge, and then the filtered sawdust is pumped into the dust removal tank by the fan through the pipeline, and then flows out from the dust removal bag.

Mechanism charcoal production process of sawdust briquette press:

1. Raw material crushing: wood, branches, bamboo, and other raw materials are crushed into sawdust by a crusher.

2. Sawdust drying: Before the sawdust is made into rods, the moisture of the raw material needs to be controlled by 12%, and the tumble dryer can achieve the drying effect once, with low power consumption and high efficiency.

3. Sawdust making rods: The dried sawdust can enter the rod making machine to start making rods. The rod making machine uses the inherent characteristics of wood raw materials to plasticize the lignin in the wood raw materials through screw extrusion under high temperature and high pressure. The fine fibers are combined to form rod-shaped fuel. The sawdust briquette press can make mandrels with diameters of 45mm, 50mm, 55mm, etc.

4. Mandrel carbonization: The gasification type carbonization furnace is the current energy-saving charcoal carbonization equipment. The modified equipment is equipped with: a biomass gasification furnace, fan, flue gas purification system, carbonization furnace, etc., put the mandrel neatly into the carbonization tank, Then push the carbonization tank into the furnace body of the carbonization furnace. At first, it is necessary to generate gas through the biomass gasifier and put wood raw materials such as sawdust into the gasifier. After ignition, combustible gases such as carbon monoxide and hydrogen are introduced through the fan. The flue gas purification system separates tar and wood vinegar to obtain pure combustible gas, which is heated by a high-pressure fan to the carbonization furnace tank (the temperature is controlled at 500℃-600℃), and a can of finished machine-made charcoal can be carbonized in three hours. There is an independent flue gas recovery pipeline, and the flue gas generated by the mandrel during the carbonization process can also be introduced into the flue gas purification system to be purified into combustible gas so that the flue gas generated during the entire carbonization process can be recycled.

5. Mechanism sawdust briquette maker is supporting equipment for processing mechanism charcoal. Around us, wood, branches, miscellaneous wood, waste wood, and other wood are crushed and processed into sawdust by the mechanism sawdust charcoal machine, and the sawdust is processed into charcoal through the charcoal machine.

Our company has the full production line of sawdust briquette press, welcome to contact us and discuss more!