Application of briquette making machine:

Barbecue, greenhouse heating, refractory materials, ceramics, etc. The service provided by the company for each customer, the chassis can be customized according to customer requirements. Localize services through the Internet and continuously improve service efficiency. In terms of the bbq charcoal making machine, the company and the technical team have undergone continuous theoretical calculations and field tests. This briquette making machine has adopted hydraulic pressure, screw pressure, and other technical methods to overcome the problems of easy sticking and large smoke, and has become an enterprise in the charcoal machine industry.

Technical information of briquette making machine:

Introduction of briquette making machine:

The tablet shape pressed by the aromatherapy charcoal tablet press is produced to the needs of the market, such as the oval, triangle, oval, square, diamond, circular, and other tablets. The material of the aroma charcoal tablet press is very simple. It can use starch, coal powder, furfural slag, sawdust and sawdust, and other materials to press into the aroma charcoal that can be used in daily life through the mode of crushing and extrusion(briquette extruder machine). The scope of application and the output are also very large, which just solves people's demａnd for carbon chips.

The working process of the briquette making machine can be divided into the following 5 steps:

1. The punch part of the lower punch extends into the middle die hole from the lower end of the middle die hole to seal the bottom of the middle die hole;

2. Use the feeder to fill the middle die hole with carbon powder;

3. The punch part of the upper punch falls into the middle die hole from the upper end of the middle die hole, and goes down for a certain stroke to press the carbon end into pieces;

4. The upper punch lifts out of the hole, and the lower punch lifts up to push the carbon sheet out of the middle die hole to complete a tableting process;

5. Lower the flush down to its original position, ready for the next filling.

Operation Noting of briquette making machine:

1. The punch and die are under a lot of pressure during the tableting process, do not put your head and hａnd into the machine.

2. When the charcoal press machine is running, it is strictly repaired or disassembled, and stones and foreign objects cannot be mixed into the machine, so as not to affect the quality of the carbon sheet.

3. The staff must wear gloves to ensure that each piece of charcoal is intact during working. The emergence of the aromatherapy charcoal tablet press has greatly improved the service response capability and speed of tablet press manufacturers, and also improved the economic benefits of manufacturers.