Application of coal crusher machine:

This coal crusher machine is widely used in Honeycomb briquette plants, Brick factories, chemical plants, mines, lime crushing plant material, etc (charcoal grinding machine).

Feature of coal crusher machine:

1. Coal roller crusher is movable and applicability is strong.

2. These coal crushers don’t have requirements for raw material humidity, viscosity, etc, so there will be no Paste plugging sieve plate situation.

3. The output fineness of the jaw crusher for coal can be controlled below 2mm.

4. Its abrasive resistance is very high and the hammer is the same as three hammers.

Technical information of coal crusher machine:

Introduction of coal crusher machine:

1. The small pulverized coal mill adopts the more advantageous structure of similar products at home and abroad and is updated and improved on the basis of the portable coal crusher in the same industry. Little(coal crusher).

2. The grinding roller of the pulverized coal mill is tightly rolled on the grinding ring under the action of centrifugal force, so when the grinding roller and the grinding ring are worn to a certain thickness, the output and fineness of the finished product will not be affected. The replacement cycle of the grinding roller and the grinding ring is long, which eliminates the shortcoming of the replacement cycle of the wearing parts of the pulverized coal mill(coal crusher).

Features of coal crusher machine:

1. At present, coal gangue, coal slag, and slag are used as additives and internal fuels in brick factories, but these materials have to be crushed, especially the crushing of wet materials, which has become a problem that plagues the production of brick factories. There is no need to worry about the pulverized coal machine here(mobile coal crusher). The pulverized coal machine adopts two rotors connected in series with each other. After the upper and lower stages of pulverization, the effect of 2 mm can be achieved, and the output is large(coal crusher).

2. In addition, the coal crusher does not have a screen mesh bottom, and the high-humidity material is not blocked. After the high-alloy hammerhead is used in combination with the hammerhead, the displacement adjustment technology(coal crusher hammer), the hammer headwear does not need to be repaired, and it can be repeated only by changing the moving position. Use, the pulverized coal machine adopts a hydraulic electric starting casing, which is safe and convenient for one person to operate and maintain(coal crusher).

3. The pulverized coal machine is equipped with a balancing device, which makes the machine run more stably, and also reduces the wear of the bearing and the high-speed shaft. Production will also increase.

Principle of coal crusher machine:

The material falls vertically into the high-speed rotating impeller from the upper part of the machine. Under the action of high-speed centrifugal force, it collides and smashes with another part of the material that is shunted around the impeller in the form of an umbrella. The materials form eddy currents between the casings, collide with each other, rub and smash each other many times, and are directly discharged from the lower part to form a closed circuit for multiple cycles. The screening equipment controls the required particle size of the finished product(coal crusher).

We have a full production line of coal and charcoal processing machine line, welcome to contact us and discuss more!