Application of coal crushing plant:
Coal crushing plant is suitable for briquette is charcoal and coal crushing machine, it is applied to crush charcoal powder or coal powder or mineral powder evenly. Then coal powder and charcoal powder are mixed with the binder evenly. Then we can use a briquette machine to make coal briquettes or charcoal briquettes.
Features of coal crushing plant:
1. It is movable and its applicability is strong.
2. This machine doesn’t have requirements for raw material humidity, viscosity, etc.
so there will be no Paste plugging sieve plate situation.
3. The output fineness can be controlled below 2mm.
4. Its abrasive resistance is very high and the hammer is the same as three hammers.
Technical information of coal crushing plant:
Model of coal crushing plant | 450 | 500 | 600 | 800 |
Feed size（ mm ） | ≤100 | ≤100 | ≤100 | ≤100 |
Discharge size（ mm ） | ≤0-3 | ≤0-3 | ≤0-3 | ≤0-3 |
Capacity（ t/h ） | 1-3 | 3-5 | 5-8 | 5-10 |
Power（ kW ） | 4-5.5 | 5.5-7.5 | 7.5-11 | 11-15 |
Weight（ kg ） | 250 | 350 | 450 | 650 |
Raw materials of coal crushing plant:
The material of coal crushing and screening plant is no longer limited in terms of soft and hard, dry and wet, stable, powerful, and noise-free, and can crush raw charcoal residue, coke, fruit charcoal, and coconut shell Raw materials such as charcoal, coal slime, anthracite, and lignite can be crushed and are widely used. Like a log, wood, bamboo, sugarcane, corn cob, twigs, branch, straw, stalk, forestry wastes, agricultural shells like peanut shells, coconut shells, husk-like coffer husks, palm husks, rice husks, and other biomass materials.
1) Diameter of raw materials: 1cm-20cm
2) Length of sawdust: 5mm-20mm
Principle of coal crushing plant:
The material falls vertically into the high-speed rotating impeller from the upper part of the machine. Under the action of high-speed centrifugal force, it collides and smashes with another part of the material that is shunted around the impeller in the form of an umbrella. The materials form eddy currents between the casings, collide with each other, rub and smash each other many times, and are directly discharged from the lower part to form a closed circuit for multiple cycles. The screening equipment controls the required particle size of the finished product(coal crusher).
We have a full production line of coal and charcoal processing machine line, welcome to contact us and discuss more!
所有評論僅代表網(wǎng)友意見，與本站立場無關(guān)。