Application of potato peeler slicer machine:

This potato peeler slicer machine is an ideal machine dedicated to cutting potatoes, potatoes, taro, carrots, sweet potatoes, jicama, sweet potatoes, and other stems, root vegetables, and fruits into slices, strips, and shreds. The efficiency of this machine is High and of good quality.

Technical information of potato peeler slicer machine:

The function of the potato washing, peeling, dicing, cutting, and shredding machine:

1. This washing machine has a high-strength belt drive, dense structure, and stable operation

2. This machine is highly efficient. It can load 8kg, 15kg, and 30kg each time, and it only takes 1-2 minutes to clean, peel, slice, and cut strips.

3. The sａnd belt on its inner wall can be replaced.

4. Stainless steel material, beautiful appearance, easy to operate, and easy to clean.

Advantages of potato cleaning, peeling, and cutting knife combination machine:

1. This machine is made of 304 stainless steel.

2. One machine integrates three functions of washing, peeling, and cutting, saving other machines, and only using this machine.

3. Potato chips, strips, and slices can be cut, and the shape can be adjusted by changing the knife.

How to use potato peeler slicer machine:

1. Please check the main parts and make sure they are ready to operate.

1)make sure the wire is in good condition and not damaged

2)make sure the feeding barrel is clean and no foreign bodies.

3)make sure the electricity meets the demands

4)make sure the screws and knives are fastened

2. Put the machine on flat ground, power on, and begin to work for one minute, then put potatoes which are needed to peel into this machine; open the water faucet at the same time to carry away potato skins. If the outlet is blocked, please stop the machine to clean out potato skins before continuing.

3. When potatoes are peeled completely, open the flashboard. Potatoes will fall into the cutting machine, then potato slices or shreds will come out from the outlet.

4. When the courses are finished, please clean the machine and knives with water, and coat the knives with edible oil for antirust.

Failure of mechanical parts and mechanical failure:

The inability of a machine to work is called a failure, and the loss of a specified working ability of a machine part is called a failure. Mechanical failure and component failure are inseparable. Failures caused by parts failure due to normal wear or physical and chemical changes of parts, such as deformation, fracture, corrosion, etc., are also called natural failures.

1. Wear parts of potato peeler slicer machine

Wear is the most important and common form of component failure.

2. Deformation of parts of potato peeler slicer machine

In the working process of the machine, the phenomenon that the size and shape of the parts change due to the force is called deformation. Metal deformation includes elastic deformation and plastic deformation.

3. Fracture of parts of potato peeler slicer machine

Under the action of external force, the part first undergoes elastic deformation. When the stress caused by the load exceeds the elastic limit and continues to increase, the material may undergo plastic deformation, and finally, fracture occurs when the stress exceeds the strength limit.

4. Corrosion of potato peeler slicer machine

(1) The punctate peeling on the surface of the part under the action of cyclic contact stress is called fatigue pitting; the damage to the surface metal of the part by the chemical and electrochemical action of the surrounding medium is called corrosion; Shaped holes, and continues to expand, called cavitation. Fatigue pitting, corrosion, and cavitation are collectively referred to as corrosion.

(2) Elimination (repair) method of mechanical failure of potato peeler slicer machine

The elimination of man-made accidental failures is mainly achieved by improving the quality of use, management, and maintenance personnel, and strengthening the sense of responsibility. Natural failures can only be achieved through adjustment and repair methods, usually the following methods of potato peeler slicer machine:

1. Repair methods that mainly restore the nature of cooperation

(1) Adjustment method of potato peeler slicer machine

Generally, adjust the bolt tightness or adjust the thickness of the gasket to restore the original matching relationship of the mating parts. When repairing, there is no need to process the mating parts (or only scrape), but only increase the gasket or adjust the thickness of the gasket. Restore it to the original fit clearance.

(2) Repair size method of potato peeler slicer machine

When repairing, the more expensive parts in the mating parts are machined to restore their geometric shapes, and at the same time a new size is obtained, and then another worn part in the mating parts is discarded and replaced with a new one that matches the processed part. Parts to restore the fitting clearance of the matching parts to the initial clearance, such as repairing the shaft and replacing the bearing bush, repairing the cylinder liner and replacing the piston, etc. This repair method should consider the possibility of processing the parts and the allowable mechanical strength after the parts are repaired. Under this premise, the number of repairs should be increased as much as possible; on the other hand, in order to facilitate the supply of spare parts, the repair size should be standardized(potato peeler slicer machine).

(3) Supplementary parts method (additional parts method)potato peeler slicer machine

In this method, each part of the mating part is processed and reshaped, and a reasonable diameter reduction or hole expansion is given to one of the parts, and then a bush of the same material or higher quality is added to it to press in with interference Or threaded or welded to the original part, and then processed to the matching size, so that the matching properties meet the requirements.(potato peeler slicer machine)