Description of bean sprout maker:
1. This machine is suitable for the germination of soybean, mung bean, barley, black bean, broad bean wheat, alfalfa, and other grains.
2. We only need to put the soybeans into the box, adjust the temperature and humidity of the machine, and connect the water pipes to automatically produce bean sprouts. According to different materials, 1 kg of soybeans can produce 8-12 kg of bean sprouts.
3. We have two types of bean sprouts machine, one is one cabinet and the other is two cabinets, the capacity is the same, but the two cabinets can be controlled and adjusted separately, which is more convenient than one cabinet.
Technical information of bean sprout maker:
Model | Voltage | Weight(kg) | Day Water consumption | Day Electricity consumption(degree/day) | Power(kW) | Basket quantity（piece） | Size(m) | |
RXZQ | 200 | 220V | 240 | 1 | 2 | 2 | 16 | 2.6×0.8×1.7 |
300 | 220V | 300 | 1.5 | 2.5 | 2.5 | 20 | 2.6×0.8×1.9 | |
400 | 220V | 380 | 2 | 3 | 3 | 24 | 2.6×0.8×2.1 | |
500 | 220V | 420 | 2.2 | 3.5 | 3 | 32 | 2.6×1.4×1.7 | |
600 | 220V | 480 | 2.2 | 3.5 | 3 | 40 | 2.6×1.4×1.9 | |
800 | 220V | 560 | 2.5 | 4 | 3.5 | 48 | 2.6×1.4×2.1 | |
1000 | 220V | 680 | 2.8 | 6 | 3.5 | 64 | 4.6×1.4×1.7 | |
1200 | 220V | 780 | 3.0 | 8 | 4 | 80 | 4.6×1.4×1.9 |
Using the guide of bean sprout maker:
1. Before cting bean sprouts, we should first select a certain amount of beans. If you want to eat soybean sprouts, then choose a certain amount
Soybeans, if you want to eat mung bean sprouts, choose certain mung beans. When selecting beans, it is necessary to remove unqualified beans such as dried beans, rotten beans, and split beans.
Subfilters can be used only after they are filtered out. What everyone needs to know here is that the beans for cting bean sprouts must use the beans produced in that year.
At the same time, if the rotten beans in the beans are not selected, they will rot during the process of cting bean sprouts, and it will also affect the
to the good beans that are growing next to them.
2. After selecting the beans, you need to soak the beans. The beans that have been soaked in water will sprout better.
The soaking time of beans is different. The soaking time for soybeans is usually about 6 hours, and the soaking time for mung beans is 4 hours.
During this period, you can observe whether the water absorbed by the beans has reached a state of saturation.
3. After the beans are soaked in water, they can be cted. When cting bean sprouts, you need to add water to the water tank of the bean sprouts machine first.
When full of water, you need to add water to the highest water level when adding water.
4. After adding the water, put the ction bucket of the bean sprout machine on the main machine of the bean sprout machine, and then evenly distribute the soaked beans
Spread it on the ction tray, and then put the ction tray into the ction barrel of the bean sprouts machine. If several layers can be placed in the ction barrel, then one
Put layer by layer slowly.
5. Don't forget to put sprinkler leaves in the ction barrel, so as to ensure that the bean sprouts can absorb the water during the growth process.
After receiving enough water, after putting the sprinkler leaves on, you can cover the lid of the bean sprout machine. In the early stage of cting bean sprouts,
Some bean sprouts cannot see light. At this time, you can use a cloth or tin foil to cover the outer shell of the bean sprouts machine. Wait until the bean sprouts have grown before removing the cloth or paper. Welcome to contact us to discuss more our bean sprout maker, and bean sprout growing machine!
所有評論僅代表網友意見，與本站立場無關。