Scope of application of plastic crusher machine:

This plastic crusher machine also called a water bottle crusher, is suitable for reusing various hard plastics, sample bottles, containers, plastic granules, flakes, and other plastic products.

Technical Data of plastic crusher machine:

Advantages of plastic crusher machine:

1. The base force of the plastic crusher machine is a stepped scissor design so that the missing chips are decomposed by force, causing the chip force to increase exponentially and the product to be uniformly granulated. The front and rear of the plastic crushing machine room are double-layered sound insulation, and the middle is filled with soundproofing material for very low noise(plastic bottle crusher machine).

2. The moving knife seat is made of high-quality steel, with reasonable rigidity and flexibility, and is not easy to break or wear.

Working principle of plastic crusher machine:

1. During the operation of the plastic crusher, the motor drives the moving knife disc to rotate at a high speed, and during the high-speed rotation of the moving knife, it forms a relative movement with the fixed knife(bottle crusher machine).

2, The gap formed between the fixed knives causes the incision of plastic crushing and shearing, so that the large pieces of plastic are crushed, and the crushed plastic is filtered and outputted by the size of the plastic particles through the screen.

Operation attention of plastic crusher machine:

The plastic crushing machine and power unit should be installed firmly. If the plastic crushing machine needs to be fixed for a long time, it should be fixed on the cement foundation; if the plastic crusher machine needs to be flown, the unit should be installed on the frame made of angle iron, and ensure that the power engine (diesel engine or electric motor of pet bottle crushing machine) and plastic The pulley grooves of the crusher are in the same rotation plane.

2. After the plastic crushing machine is installed, check the fastening of each fastener and tighten it if it is loose. At the same time, check whether the belt tightness is appropriate.

3. Before starting the plastic crushing machine, turn the rotor by hａnd to check whether the claws, hammers, and the rotor are running flexibly and reliably, whether there is any collision in the crushing chamber, and whether the rotation direction of the rotor is consistent with the direction indicated by the machine arrow, and whether the power machine and the rotor are in the same direction. Whether the plastic crusher is well lubricated.

4. Do not replace the pulley casually, in case the rotating speed is too high to cause the crushing chamber to explode, or the rotating speed is too low to affect the working efficiency of the pulverizer.

5. After the plastic shredder is started, it should be kept idling for 2~3 minutes first, and there is no abnormal phenomenon before feeding work.

6. Pay attention to the operation of the plastic crusher machine at any time during the work. First, the feeding should be uniform to prevent the crushing chamber from being blocked; secondly, do not overload the work for a long time. If it is found that there is vibration, noise, high temperature of the bearing and the body, and material spraying out, it should be stopped immediately for inspection, and the work can be continued after troubleshooting.

A big model of plastic crushing machine is as follows: