美國萊特浩斯Lighthouse Solair 5100便攜式粒子計數器
Solair 5100彩屏顯示，帶電電池的便攜式微粒計數器0.3微米◎1.0立方英尺6通道。

Solair 3100和Solair 5100便攜式粒子計數器結合了激光二極管技術感應器，平均時間（持續運作24/7的 基礎).Solair系列采用了行業內用戶界面來配置和操作儀器。直觀的圖標指示屏幕簡單易學易操作。這款儀器可在8通道存儲多達3000組粒子數據。所有的數據可以快速可靠的傳輸到具有設備監測系統或建筑自動化系統的電腦上。通過使用Lighthouse安全數據傳輸和LMS Express或Express RT 軟件可以讀取傳輸到USB驅動器上的安全數據（符合21 CFR Part 11標準）。
以太網，RS-485，USB和USB驅動器接口的整合形成了這些儀器靈活的通訊系統。

萊特浩斯產品設計、制造和校準符合ISO21501-4標準確保粒子計數的準確性。

SOLAIR 5100
Portable Particle Counter

Number 1 in Versatility

The SOLAIR 5100 is the most versatile particle counter on the market today.

Whether you are certifying your cleanroom to ISO standards, performing routing testing, counting particles in your compressed gas lines, scanning your HEPA filters for leaks, challenge testing your HEPA filters or measuring environmental parameters such as TRH, DP, AV the SOLAIR 5100 portable particle counter is the right instrument to get the job done.

Cleanroom Certification

Whether you are certifying to current ISO 146644 standards, EU GMP Annex 1 or Federal Standards 209E, the SOLAIR 5100 has you covered with its certification report wizard.

Routine Testing

Routine testing is a breeze with the intuitive interface, zoom screen and on board sample recipes.

Troubleshooting

With beep and concentration sample modes the SOLAIR 5100 will simplify the identification of particle sources within your clean room.

Compressed Gas Testing

The SOLAIR 5100 can be used to test for particle counts in compressed air by utilizing a high pressure diffuser or high pressure controller. Particles can be tested down to 0.5 micron.

HEPA Filter Scanning

The scanning of HEPA filters is a critical step to ensure the integrity of the HEPA filter and overall cleanliness of the clean room. The ScanAir attachment from Lighthouse makes filter scanning an easier operation.

HEPA Filter Challenge Testing

Monitoring of other environmental parameters such as Temp, Humidity, Differential Pressure or Air Velocity.

Other Environmental Sampling

The SOLAIR 5100 can record data from up to 4 environmental sensors that plug into and are powered by the SOLAIR 5100. Data is recorded into the 3,000 record data buffer and can be downloaded along with the particle count data to your computer of via USB key.

Ease of Use

Spend less time configuring your particle counter and more time counting particles. The SOLAIR 5100 features one of the industry’s best and easy to use touch screen interface (UI). With ICON-driven menus, concise layout and enhanced responsiveness, sample configuration is a breeze.

The intuitive interface reduces learning uptime for new users and simplifies the writing of SOP’s for operation.

For clean room certification the SOLAIR 5100 has an integrated report wizard that makes clean room certification a breeze. Once the basic sample parameters are input the wizard will prompt the end user to move to the next sample location, this helps to ensure no sample locations are missed.

The configurable recipe database can store up to 50 recipes for sampling and reports. These recipes reduce operator configuration errors as well as setup time.

Lighter is better and the SOLAIR 5100 particle counter is one of the lightest particle counters on the market at only 12 lbs. without battery and 13.4 with a battery.

The SOLAIR 5100 can be powered via onboard battery or plugged directly into a power outlet for extended use. With the fastest battery recharge time of any portable on the market the SOLAIR 5100 offers unrivaled uptime.

Data from the SOLAIR 5100 can be downloaded directly to a standalone software package or a real time monitoring system from Lighthouse.

Flexible communications with these instruments is made possible by the integrated Ethernet, RS-485, USB and USB flash drive interfaces.

Reliability

The SOLAIR 5100 incorporates our extreme life laser diode technology sensor to produce the industry’s longest laser diode life of 20 year MTTF (based on continuous 24/7 operation).

The vacuum system within the SOLAIR 5100 was designed with closed loop feedback to ensure accurate sample volumes. The vacuum pump was designed and built by Lighthouse to ensure long term reliability.

The SOLAIR 5100 is designed, manufactured and calibrated to ISO 21501-4 to ensure particle-counting accuracy.

The SOLAIR 5100 can store up to 3,000 records of particle count data from up to 8 particle channels and the configurable recipe database can store up to 50 recipes for sampling and reports. All data can be quickly and reliably transferred to a computer, a Facility Monitoring System or a Building Automation System. Secure data transfer (per 21 CFR Part 11) to a USB flash drive can be accomplished by using the Lighthouse secure data transfer feature and LMS Express software.

Key Features:

1.0 CFM (28.3 LPM) flow rate
Up to 8 particle sizes
Number 1 in class for versatility
Industries Best User Interface
ISO 21501-4 Compliant
One of the lightest portables on the market
20-year MTTF laser lifespan
Stainless steel construction
21 CFR Part 11 compliant secure data transfer via USB flash drive
Report wizard for cleanroom pass/fail reports: FS-209E, ISO 14644-1 (2015 version) and EU GMP Annex 1
Multiple communication interfaces; USB, RS-485, Ethernet and USB flash drive
5.7-inch color TFT touch screen display
3,000 record data storage memory
50-record configurable recipe database
Multiple-language support: English, French, German, Italian, Spanish, Chinese, Russian, Japanese, Korean