SCRAPE TEST MACHINE刮痕測試試驗機（中文資料）

符合標準

BS 3962-6:1980 Part 6: Assessment of resistance to mechanical damage

標尺主要技術參數

標尺刻度：0-10N

刻度精度：0.1N

刻度偏差：±3%

10N以上力值處理辦法：附加5N砝碼

試驗力：15N（可拓展至更大的試驗力值）

刀頭主要技術參數

刮擦樣品處角度：89°

刮擦樣品處直徑：9.52mm

刀片厚度：10mm

試驗時與樣品所成角度：90°

破損刀頭處理辦法：丟棄后更換新件

材料：碳化鎢鋼

材料特性：硬而易裂

樣品托盤主要技術參數

樣品尺寸：寬238±2mm，厚度為產品厚度，長度依照試驗要求自行設定，但不可小于66mm；

樣品厚度：30mm

移動距離：200mm

測試移動時間：10s

測試復位時間：10s

測試中斷電解決辦法：重新通電后自行回零

操作功能鍵

電源鍵：通電后電源鍵亮燈，按下通電，再按下斷電

復位鍵：測試結束后按下，樣品盤回零

測試鍵：樣品盤回零后，按下樣品盤向右以20mm/s的速度移動200mm

設備基本參數

電源：220V 50Hz

功率：小于50W

設備尺寸（約）：664.5*300*170mm

發貨清單

SCRAPE TEST MACHINE刮痕測試試驗機主機，鎢鋼特制刀片，說明書，合格證。

SCRAPE TEST MACHINE刮痕測試試驗機（英文資料）

Standard Coincided

BS 3962-6:1980 Part 6: Assessment of resistance to mechanical damage

Main parameter of scale

Force Value：0-10N

scale division：0.1N

deviation of division：±3%

Method of Force Value above 10N: Adding 5N Weight

Maximum test force: 15N (can be extended to larger test force value)

Main Technical Parameters of Cutter Head

Sample scraping angle: 89°

Sample scraping diameter: 9.52mm

Blade thickness: 10mm

The angle between the blade and the sample when testing: 90°

Disposal of damaged blade head: Replacement of new parts after discarding

Material: Tungsten Carbide Steel

Properties of material: Hard and Crackable

Main Technical Parameters of Sample Pallet

Sample size: 238 + 2mm wide, product thickness, length according to test requirements, but can not be less than 66mm;

Maximum thickness of sample: 30mm

Moving distance: 200 mm

Test time: 10s

Reset time: 10s

Solution to test power interruption: self-return to zero after re-energizing

Operating function key

Power key: power key lights up after power on, power is on after the key is pressed, then off after another press

Reset key: press the key after test and the sample pallet will return to zero

Test key: After the sample pallet returns to zero, press the key then the sample pallet will move 200mm to the right at a speed of 20 mm/s.

Basic parameters of equipment

Power supply: 220V 50Hz

Power: less than 50W

Equipment Dimensions (Approximate): 664.5*300*170mm

Shipping list

Mainframe of scraper test machine, Blades of tungsten steel special, Specifications, Certification.