01 雙上熔膠系統
Double Up-gluing Unit
可選配PUR裝置，快速切換兩種膠水，實現不同膠水封邊的生產需求。
Optional PUR unit,two kinds of glue can switch quickly,realize the production demand of different glue.
自動上膠粒機構，可存12.5kg大容量膠粒，可自動供膠，確保長時間供應。
EVA Applicator with max. capacity 1.25KGS automatically refills EVA glue to ensure a long-time supply.
02 高速跟蹤機構
High Speed Corner-rounding
采用高頻馬達修邊電機，快速、穩定，對前后兩端封邊帶，進行精準的仿形圓角修邊。
Using high-frequency trimming motor,fast and stable,edge banding on both ends,precisely perform round edges.
01 履帶壓料
Belt Conveyer
壓緊接觸面積大，具有更好的壓緊定位效果。
Large contact area for pressing, better pressing and positioning effect.
02 預銑機構
Pre-milling Unit
標配40mm預銑機構，可修正板材封邊面，使封邊條與板材能貼合更緊密，整體性和美觀度更佳。
Standard with 40T pre-milling cutter, to trim off the defects of panel surface, and thus to achieve a close sticking and a better edge results.
03 預熱
Pre-heating Unit
預熱板件，提升封邊帶的粘合效果。
Workpiece pre-heats to improve a better edging result.
04 兩組五輪壓貼
Five-wheel Pressing
強力壓合邊帶，提高封邊粘合效果。
Strongly press edge tape to improve edge banding effect.
05 雙導軌齊頭機構
Double-Rail End Cutting
快速切斷前后封邊帶，前后單獨導軌配置，提高效率。
Realize fast cutting both ends to improve accuracy and efficiency.
06 往復式拋光
Reciprocating Buffing
清除殘余粘膠，使板材更光滑。
Clean off the residual glue, to ensure a smooth panel surface.
07 壓梁自動定位
Pressure Beam Positioning System
快速切換加工不同厚度的板件，減少調機時間，提高效率。
Pressure beam can be switched quickly according to panels of different thickness to reduce adjustment time,which improves efficiency.
08 自動潤滑系統
Auto Lubricattem
根據機器運轉的時間，定時自動給導軌注油。
Automatic oiling of the rail according to running time.
