MicroMist nebulizer (Glass), 1/pk

Standard on 7700x/e and 7500cx/ce.

When ordered for the 7500a, the spray chamber

規格參數

scription    Specifications    Use    Unit    7700

Part No.    7500

Part No.

MicroMist Nebulizer    Borosilicate glass    Standard on 7700x/e and 7500cx/ce.

When ordered for the 7500a, the spray chamber

end cap (G1833-65475) is also required.         G3266-65003    G3266-65003

Sample tubing    0.25 mm ID, 700 mm,

with connector    For MicroMist Nebulizer    10/pk    G3266-80010    G3266-80010

Sample tubing    0.5 mm ID, 700 mm,

with connector    For MicroMist Nebulizer    10/pk    G3266-80011    G3266-80011

Carrier gas connector         For MicroMist Nebulizer         G3266-80015    G3266-80015

Nebulizer cleaner         For MicroMist Nebulizer         G3266-80020    G3266-80020

MicroFlow Nebulizer    PFA, 200 μL/min              G3139-65100    G3139-65100

MicroFlow Nebulizer

with I-AS probe    PFA, 200 μL/min    Standard on 7700s and 7500s         G3139-65102    G3139-65102

MicroFlow Nebulizer    PFA, 20-50 μL/min              G3139-65106    G3139-65106

MicroFlow Nebulizer

with I-AS probe    PFA, 20-50 μL/min              G3139-65108    G3139-65108

Carrier gas line connector         For MicroFlow Nebulizer    2/pk    G1833-65583    G1833-65583

Mira Mist Nebulizer    PTFE              G3161-80000    G3161-80000

Mira Mist Nebulizer    PEEK    For high solids applications such as environmental,

geological, etc. Not for semiconductor use since

it does not self aspirate. When ordered for

the 7500a, the spray chamber end cap

(G1833-65475) is also required (included

with 7500cx/cs).         G3161-80001    G3161-80001

Babington Nebulizer    Includes Viton O-ring,

PTFE sample tubing,

and connector    Use to introduce samples with high matrix

and high total salts. Clean when contaminated

or when orifices are clogged.              G1820-60453

End cap for Babington

Nebulizer, polypropylene    Includes Viton O-rings    Replace when memory effects do not disappear

after cleaning. Insert nebulizer in middle of end

cap all the way through. Attach end cap to spray

chamber with "TOP" mark facing up.              G1833-65476

Babington Nebulizer

removal tool                        G1820-65345

Concentric Nebulizer,

Pyrex    Use with P/N

G1820-65052

Argon gas connector,

P/N G1820-60160

Connector kit, P/N

G1820-65121 end cap    Use with clean samples only. Not resistant

to hydrochloric acid. Clean with a 5% HNO3 (v/v)

bath; do not use ultrasonic bath.         G1820-65030    G1820-65030

Concentric Nebulizer,

quartz    Use with P/N

G1820-65337

Quartz spray chamber,

P/N G1820-80237

Quartz connecting pipe    Recommended for trace analysis of clean samples.

Lower contamination level than Pyrex. Clean using

5% HNO3 (v/v) bath; do not use ultrasonic bath.         G1820-65138    G1820-65138

Connector for carrier gas

line, polypropylene    4 mm tubing, includes

ferrule and O-ring    For gas line connection to Concentric Nebulizer         G1820-65052    G1820-65052

Sample tubing with

connector, PTFE    Tool included    For Babington Nebulizer, replace when heavily

contaminated by high matrix samples.              G1820-65276

Sample line connector    Includes Viton O-ring    Connects Concentric Nebulizer with sample line.

Port with large hole connects to nebulizer; smaller

port connects with sample tubing.         G1820-60160    G1820-60160

Union fitting    4 mm tubing    For PFA Concentric Nebulizer         5064-8078    5064-8078

Ferrule and Viton O-ring

kit for carrier gas line

connector         For Babington/Concentric Nebulizer         G1820-65533    G1820-65533

End cap for Concentric

Nebulizer, PTFE    Includes Viton O-rings    Connects the Concentric Nebulizer (Pyrex or

Quartz) with the spray chamber. For MicroMist,

MicroFlow, and other concentric nebulizers.              G1833-65475

O-rings for Babington

Nebulizer, Viton         Used to create seal between Babington

Nebulizer and end cap.    4/pk         G1820-65199

O-ring kit for Concentric

Nebulizer, Viton    2 sizes, 10 each         20/pk    G1820-65491    G1820-65491

O-rings for Concentric

Nebulizer, for organic

solvents (3 types)              4/pk    G1820-65520    G1820-65520

O-rings for end cap, Viton         Use for the end cap of the Babington Nebulizer,

Cross Flow Nebulizer and Concentric Nebulizer.    5/pk         G1820-65198

O-rings for end cap,

for organic solvents              2/pk         G1820-65518

CrossFlow Nebulizer    Includes bushing,

carrier gas line

connector, blend gas

line connector, sample

tubing, and gas line

tubings with

inner sleeves    Standard nebulizer for the inert kit.

Resistant to hydrofluoric acid. Set carrier

gas pressure to 500 kPa (5 kg/cm2).

Clean with 5% HNO3 (v/v) bath. Replace

when memory effects remain after cleaning.              G1833-65462

ICP-MS玻璃霧化器

ICP-MS玻璃霧化器