剝離強度測試儀

一、   產品介紹Introduction：

二、產品特點Specification： 

2.1 搭配LED數碼顯示屏高精密拉力計，方便用戶快速、直觀的查看結果。

With the high precision tension meter of LED digital display screen, it is convenient for users to view the results quickly and intuitively.

2.2軟板、硬板通用設計，可自行更換夾具，適用多個產品。

General design of soft plate and hard board, can replace the fixture by itself and apply to multiple products.

2.3 配備限位保護、專用軟件可一建上下行駛。

Equipped with limited protection, special software can be built up and down.

2.4 三個單位 N fg lb可自行切換。

Three units N fg lb can be switched.

三、適樣方法Suitable method：

使用足夠尺寸的銅箔介質層壓板，切割三塊試樣，寬3.2 mm、長至少50.8mm。切割應整齊，沒有毛刺和缺口將樣品安裝在夾具上，重復三次測試。

Use the copper foil laminate with enough size to cut the three samples, the width is 3.2 mm and the length is at least 50.8mm. The cutting should be neat, without burr and gap to install the sample on the fixture and repeat the test three times.

四、執行標準Executive standard：

IPC-TM-650

GB/T 4677—2002 7.1.1 標準 standard

GB/T 13557—92 標準 standard

五、技術參數Parameter：