讀數時間的影響
邵爾A型硬度計在測量時讀數時間對試驗結果影響很大。壓針與試樣受壓后立即讀數與指針穩定后再讀數，所得的結果相差很大，前者高，后者偏低，二者之差可達5至7度左右，尤其再合成橡膠測試中較為顯著，這主要使膠料在受壓后產生蠕變所致。一般試樣受壓后應立即讀取數據（注）。
 |  |
 |  |
 |  |
| 產品說明Product description | |||||||
| ·TN65A-05是一款高性能高分子材料，與尼龍的粘接強度高。材料耐高溫。不粘模具，可快速成型。 ·TN65A-05 is a high performance polymer material, and the high bonding strength of nylon. Material resistance to high temperature. Non stick mold, can be rapid prototyping. | |||||||
| 關鍵特性Key characteristic | |||||||
| |||||||
| 功能Function | |||||||
| 產品應用 main application | 工具手把Tool hand | 汽車產品Automotive products | |||||
|
| 儀器外殼Instrument housing |
| |||||
| 加工方法Processing method | 注塑成型Injection molding | ||||||
| 環保認證 Environmental certification | ROHS | REACH | EN71-3 | ||||
|
| PAHS | ASTM-F963 | Phthalate | ||||
| 顏色Color | 本色 | ||||||
| 氣味Smell | 少許樹脂味A little resin smell | ||||||
| 外型Appearance | 圓球形小顆粒Cylindrical particle，about 3mm×1.5mm | ||||||
| 儲藏期Storage period | 常溫下通風干燥，24個月Ventilated dry at normal temperature，about 24 months | ||||||
| 包裝方式Packaging method | 25公斤/袋 25kg/bag | ||||||
| 物理性能Physical properties | 結果Result | 單位Unit | 方法Method | 成型條件Molding condition | |||
| 比重Specific gravity | 1.06±0.02 | g/cm3 | ASTM D792 | 干燥溫度Drying temp 90℃ | |||
| 硬度Hardness | 65±5 | shoreA | ASTM D2240 | 干燥時間Drying time 2Hours | |||
| 拉伸強度Tensile strength | >3 | Mpa | ASTM D412 | 射嘴溫度Nozzle temp 240℃ | |||
| 斷裂延伸Elongation at break | >400 | % | ASTM D412 | 螺筒一段溫度Screw 1 temp 230℃ | |||
| 撕裂強度Tearing strength | >22 | Kn/m | ASTM D624 | 螺筒二段溫度Screw 2 temp 220℃ | |||
| 熔融指數Melt index | <6 | g/10min | ASTM D1238 | 螺筒三段溫度Screw 3 temp 200℃ | |||
 |  |  |
 |  |  |
 |  |  |
所有評論僅代表網友意見，與本站立場無關。