產品規格書/Specification
產品/product: | 包封漿料/ package paste |
料號/part number: | 09L-4406 |
適用范圍/Application:
該款漿料適合于電路、電阻片外封標識,外層包封,可用于玻璃、陶瓷、不銹鋼、鋁合金等基材
The paste is suitable for marking thick film circuit and outside package, glass, ceramic, metal, etc.
使用條件/Operating conditions:
基材 Substrate | 厚膜電路、玻璃、陶瓷、金屬等 thick film circuit, glass, ceramic, metal, etc. |
使用方法 Method of use | 印刷,200-250目 Printing, 200-250mesh |
流平 Levelling | 5-10min minutes at room temperature 室溫下流平5-10分鐘(時間根據流平的實際情況決定)。 |
通風烘箱烘烤150~200℃,20-30分鐘 | |
固化 Curing conditions | (固化溫度可以在150-200℃范圍內,固化時間可根據實際情況決定) 150~200℃, 20-30 min ( It could be cured at a temperature between 150~ 200°C, but it depends of the thickness and the substrate.) |
稀釋劑 Thinner | ST-1001 |
性能/Characteristics:
1.漿料性能/Paste Characteristics:
性能 Characteristic | 標準Standard | 測試方法及條件 Test method and conditions | |
1 | 細度 Fineness | ≤8μm | FOG test |
2 | 粘度 Viscosity | 80~150Pa.s | Brookfield HBT utility cup and spindle (SC4-14/6R), 10rpm,25±1℃, Brookfield HBT(博利飛)粘度計, 轉子 SC4-14/6R), 10rpm,25±1℃ |
3 | Appearance 外觀 | 白色,黑色,藍色,綠色 white, black,blue, green | |
2.燒結后特性/Characteristics aftercuring:
在 1 燒結條件下,Check fired film produced under the conditions specified in 1),
特性 Characteristics | Standard 標準 | 測試方法和條件 Test method and conditions | |
4 | Acid resistance 耐酸性 | ||
















所有評論僅代表網友意見,與本站立場無關。