產品規格書/Specification
產品/product: | 標識漿料/ Marking paste |
料號/part number: | 07M-4406 |
適用范圍/Application:
該款漿料適合于電路、電阻片外封標識, 外層包封,可用于玻璃、陶瓷、不銹鋼、鋁合金等基材
The paste is suitable for marking thick film circuit and outside package, glass, ceramic, metal, etc.
使用條件/Operating conditions:
基材 Substrate | 厚膜電路、玻璃、陶瓷、金屬等 thick film circuit, glass, ceramic, metal, etc. |
使用方法 Method of use | 印刷,200-250目 Printing, 200-250mesh |
流平 Levelling | 5-10min minutes at room temperature 室溫下流平5-10分鐘(時間根據流平的實際情況決定)。 |
烘干 Curing conditions | 通風烘箱烘烤100-150℃,10-15分鐘 (空考溫度低于300℃,可根據烘烤的實際情況決定烘烤時間。)100-150℃10-15 min |
隧道爐空氣氣氛下燒結,峰值550±10℃(推薦值),10分鐘。 | |
燒結 | (可根據實際需要,燒結范圍可在530-650℃內調節,但峰值溫度時間必須10分鐘。) |
Firing Condition | Atmospheric firing in belt furnace with peak time of 9-11 Minutes at 550±10℃ |
(According to actual needs, sintering range can be adjusted within 530-650℃) | |
稀釋劑 Thinner | ST-1001 |
性能/Characteristics:
1.漿料性能/Paste Characteristics:
性能 Characteristic | 標準Standard | 測試方法及條件 Test method and conditions | |
1 | 細度 Fineness | ≤8μm | FOG test |
2 | 粘度 Viscosity | 100~200Pa.s | Brookfield HBT utility cup and spindle (SC4-14/6R), 10rpm,25±1℃, Brookfield HBT(博利飛)粘度計, 轉子 SC4-14/6R), 10rpm,25±1℃ |
3 | Appearance 外觀 | 透明,黑色,藍色,綠色,白色 Transparent, black, blue, green, white | |
















所有評論僅代表網友意見,與本站立場無關。