| These thickness gauges are especially handy for measuring thickness of small parts, metal, rubber, vinyl, paper, foil and other sheet material. | |
 | The objects to be measured is clamped by simple lever operation. The measured values are read directly on the dial gauge. |
| Since the anvil and the contact point are adjusted for parallelism, accurate measured values are obtained. |
| Specifications | |||||||||
| Model | Graduation (mm) | Range (mm) | Throat depth (mm) | Accuracy (?m) | Contact Point | Measuring force less than (N) | |||
| Dia (mm) | Parallelism (?m) | ||||||||
| G | 0.01 | 0 - 10 | 20 | ±20 | 10 | 5 | 1.8 | ||
| G-MT | 0.01 | 0 - 10 | 20 | ±20 | 10 (metal) | 5 | 1.8 | ||
| G-1A | 0.01 | 0 - 10 | 20 | ±20 | 5 | 5 | 1.8 | ||
| G-1M | 0.01 | 0 - 10 | 20 | ±20 | 6 | 5 | 1.8 | ||
| PG-10 | 0.01 | 0 - 10 | 20 | ±20 | 10 (metal) | 5 | 1.8 | ||
| G-2 | 0.01 | 0 - 20 | 33 | ±22 | 10 | 5 | 2.0 | ||
| G-3 | 0.01 | 30 (Anvil 20mm) | 20 | ±20 | 10 | 5 | 1.8 | ||
| G-4 | 0.01 | 65 (Anvil 55mm) | 30 | ±20 | ball tip | -- | 1.8 | ||
| H | 0.01 | 0 - 10 | 120 | ±20 | 10 | 5 | 1.8 | ||
| H-MT | 0.01 | 0 - 10 | 120 | ±20 | 10 (metal) | 5 | 1.8 | ||
| H-1A | 0.01 | 0 - 10 | 120 | ±20 | 5 | 5 | 1.8 | ||
| H-2 | 0.01 | 0 - 10 | 170 | ±20 | Spherical | -- | 1.8 | ||
| H-3 | 0.01 | 0 - 10 | 170 | ±20 | Spherical | -- | 1.8 | ||
| |||||||||
Examples of modification for contact point and anvil 
Dimensions; PG-10
所有評論僅代表網友意見，與本站立場無關。