When using a dial gauge, it is usually mounted on a jig for inspection. To perform its periodic inspection, it needs a lot of processes more than the other measuring instruments and further time-consuming troublesome works to graph the inspected results are required.
	Model "DGT-20G" contributes to decrease such troublesome works extremely.
	By only setting a pointer of dial gauge and just turning on a memory switch, gauge testing is automatically made.
	Everyone can use it with great ease.

(1) Easy operation
	By only setting a pointer on the scale of dial gauge and just turning on a memory switch, measured data is processed by a micro-computer and its results are automatically printed out.

(2) Reducing eye strain
	Only fix your eyes to a pointer of dial gauge! Since you do not read the scale of a gauge tester, measurement for a long time will not tire your eyes.

(3) Reducing your inspection time extremely
	It can reduce your inspection time from one third to one fifth shorter compared with the conventional method of inspection since this tester has no necessity of reading, recording, and judging the error values.

(4) High precision
	Usual calibration is not necessary because of the optical glass scale capable of maintaining the stable accuracy with less aged deterioration. Stable inspection is possible because a spindle is not a revolutionary type but a straight one.
(5) Register function
	Once the measuring range, pitch, and values for judgement are registered, speedy inspection can be done just by calling out these items. There include the items already registered by the maker(ROM)and the ones to be originally registered by users(RAM).
(6) Manual mode
	Measuring items can be set by manual setting. It will be effective to inspect such a gauge that you do not usually use.

Dimensions

Specifications

Model

DGT-20G

Measuring Range

0 - 20mm

Resolution

0.2 μm

Accuracy

±1 μm

Standard Scale

Incremental linear scale

Feed Portion

Micrometer head

Display Portion

Standard value

Error value

Applicable gauges

Dial gauge ( based on JIS B 7503 )

Lever-type gauges ( based on JIS 7515 )

Cylinder gauge ( based on JIS B 7515 )

Special type gauge ( based on JIS B 7533 )

Minimum pitch

1 μm ( 0.5μm is impossible )

Maximum input points

200 points

Registered code

24 points

User register code

About 130 points ( input by users )

Selection of printing

Print all data

Print only results

Print line graphics

Judgement

By setting the values for judgement, NG value is printed in red letters.

Display function

Standard value is displayed on the left.

Error value is displayed on the right.
( Narrow range, wide range, or return error is automatically switched. )

Key input function

Measuring date, measuring person, control number

code number ( within ten characters )

Preset function

Measuring a long stroke gauge of 20 to 40 mm

Recording paper

Plain paper roll 57×?50mm available in the market

Power supply

AC100V ±10% 50/60Hz

Standard accessories

Attachment for lever-type dial gauge --> 1 Pc.

Attachment for back plunger dial gauge --> 1 Pc.

Mirror ( for lever-type dial gauge ) --> 1 Pc.

Connecting code 1 pc., recording paper 1 roll, ink ribbon

Options

Attachment for cylinder gauge ( DGT-CC )

Attachment for back plunger dial gauge

Panel in English, Display in inch

Foot-switch ( for memory )

Storing data in a PC, development of software

Data output

Based on RS-232C output Transmit entire data upon test completion Connector D-Sub25P	Transmission method	Asynchronous style
	baud rate	4800 Bps
	start bit	1 bit
	stop bit	1 bit
	code	ASCⅡ 8 bit
	parity	none