產品介紹:Product Introduction:

泰思泰克透過材料接觸傳熱性測試儀根據ISO12127-200設計研發并制造；該儀器通過加熱鋼柱自由落下接觸試樣及熱量計，模擬在實際使用過程中，高溫金屬飛濺至，測試的傳熱性能；該儀器操作簡單，數據準確，安全可靠，廣泛應用于消防相關公司及檢測部門；(圖片僅供參考)

產品型號Model：TTech-ISO12127-2

符合標準Standard：

ISO12127-2

技術參數Parameters

1、該設備由加熱箱，控制箱及不銹鋼試驗架臺構成；

The equipment consists of Heating oven, control cabinet and stainless steel test bench;

2、鋼柱下降采用電機控制，自動控制滑板，從而使鋼柱自動落下；

The falling of steel cylinder, is controlled by motor and slide plate is controlled automatically, so that the steel cylinder falls automatically;

3、K型鎧裝熱電偶，直徑1.5mm，測溫精度0.1℃；

K type thermocouple with a diameter of 1.5mm and a temperature measurement of 0.1 ℃.

4、加熱箱采用馬弗爐，控制加熱溫度大于800℃；

The Muffle furnace is used in the heating oven to control the heating temperature above 800 ℃

5、設備采用半導體冷卻方式，測試前，使熱量計溫度降至（20±1）℃；

Before the test, the temperature of calorimeter should be reduced to (20 ± 1) ℃.

6、配備兩個配重砝碼，重量（175±5）g；

Equipped with two weights, the weight is (175 ± 5) g;

7、計時器計時范圍9999s，計時精度0.1s；

The timing range of the timer is0- 9999s, and the timing accuracy is 0.1s.

8、熱量計銅盤直徑（8±0.02）mm，厚度（1.7±0.02）mm，并裝配K型溫度傳感器，測溫范圍不低于1000℃；

The dimensions of the copper disc are: diameter (8 ± 0.02) mm and the thickness (1.7 ± 0.02) mm.Comprising a K-type thermocouple inserted into the copper disc. Testing range≥1000℃

9、熱量計支撐臺由鋁塊制成，安裝在塑料底座上；

Support block for the specimen and calorimeter , made of a curved aluminium sheet and fitted on a plastic base element

10、鋼柱直徑（6mm±11μm），高度（12mm±11μm），質量（2.6g±20mg）；

Steel cylinder: Diameter: ? 6,0 mm ± 11 µm ,Height: 12 mm ± 11 µm,Mass: 2,6 g ± 20 mg

11、試樣尺寸（180*25）mm；

Sample diameter: （180*25）mm

12、PLC 及觸摸屏智能控制系統；

PLC and touch screen control system

13、升溫PID智能控制，系統自動采集溫度數據（包括實驗開始溫度、溫度，溫差△T、實時溫度）；

PID intelligent control, the system automatically collects temperature data (including start temperature, maximum temperature, temperature difference △ T, real-time temperature);

14、試驗數據系統自動計算，自動存儲；

The test data is calculated and stored automatically;

15、設備占地尺寸：1800mm x 600 mm x 800mm；

Dimension:1800mm x 600 mm x 800mm

16、電源 380V  50/60Hz, 功率6000w

AC 220V 50/60Hz, 6000W

17、產品合格證、說明書各一份。

Manual and certificate of quality are provided.