遼寧恒潤石油化工有限公司是中國的工業化學品進口服務商，致力于為客戶提供高效便捷的服務，我司與國外70多家品牌生產商代理商建立長期的戰略合作伙伴關系，能夠快速幫助客戶解決實際問題保證、并且長期穩定為客戶儲備庫存，節約客戶等貨時間。涉及行業油：汽車行業、礦山行業、風電行業、紡織行業、石油開采、軌道交通、食品醫療、電子行業、船舶制造與維護保養、航空航天、電機軸承、潤滑系統、儀器行業。公司代理經銷品牌有：瑞士摩托瑞斯MOTOREX、尼科NYCO、克魯伯KLUBER、摩力克MOLYKOTE、魔力多MOLYDUVAL、科路德KLUTHE、福斯FUCHS、潘東興PENTOSIN、阿維亞AVIA、安潤龍ANDEROL、亞拉ARAL、雪弗龍Chevron、赤士頓CHESTERTON LE、勞勃抗LUBCON、好富頓HOUGHTON、嘉實多Castrol、魔力大MOLYDAL、羅哥ROCOL、凱密特爾Chemetall、等品牌潤滑油、潤滑脂、防銹油、磨削液、切削液、鋰基脂等。
公司：

OKS 3541 – 高高溫粘性潤滑劑，合成，噴劑

的液態潤滑劑，用于處在高溫下或受水影響強烈的機器零部件的潤滑。

應用領域

對處在至 +250℃ 以下溫度或受水影響下的鏈條、聯桿、頂針、夾具框架和干燥框架或滑軌進行潤滑，例如油漆設備、燒制設備、干燥床和冷卻床設備內的輸送系統

優點和效用

抗氧化特性

防水和防水蒸氣

良好的蠕變性能

的粘附及潤滑效果，不會滴落

不會形成頑固殘留

Mox-Active 帶來的防磨損保護效果

耐受紫外線

技術參數

使用溫度：-10℃ → +250℃

密度（20℃）： g/ml

粘度（40℃）：4,000 mm2/s

四球測試 (焊合負載)：2,200 N

應用

為了達到的表面清潔功效，首先用機械清潔，然后用 OKS 2610/OKS 2611 通用清潔劑清潔。使用前請攪勻/搖勻。使用油刷、滴油壺、通過浸透方式或用合適的自動潤滑設備在需要潤滑的部位上涂覆 OKS 354。均勻噴涂 OKS 3541產品。任由多余液體滴落并待產品充分發揮作用后再開始運行。遵守機器制造商的提示說明。依據相應使用條件確定再次潤滑的時間和用量，同時注意避免過量。只和合適的潤滑劑攪拌。

OKS 3541 - High temperature viscous lubricant, synthetic, spray

A non-polluting liquid lubricant for lubrication of machine parts that are exposed to high temperatures or that are strongly affected by water.

Application field

Lubricate chains, links, thimbles, clamp frames and drying frames or slides that are at temperatures below +250 ° C or affected by water, such as in paint, firing, drying and cooling bed equipment system

Advantages and utility

Excellent antioxidant properties

Waterproof and waterproof vapour

Good creep performance

Significant adhesion and lubrication, no dripping

Will not form stubborn residue

Mox-Active delivers outstanding wear protection

Tolerant to ultraviolet light

technical parameter

Operating temperature: -10 ° C→ +250° C

Density (20 ° C): g / ml

Viscosity (40 ° C): 4,000 mm2 / s

Four ball test (welded load): 2,200 N

application

For optimum surface cleaning, it is best to first clean it mechanically and then clean it with OKS 2610/OKS 2611 Universal Cleaner. Stir well/shake well before use. Apply OKS 354 to the area where lubrication is required using a brush, drip pot, by soaking or with a suitable automatic lubrication device. Spray the OKS 3541 product evenly. Allow excess liquid to drip and wait until the product is fully functional before starting operation. Follow the machine manufacturer&＃39;s instructions. Determine the time and amount of relubrication according to the corresponding conditions of use, and take care to avoid excessive. Stir only with a suitable lubricant.