遼寧恒潤石油化工有限公司是中國的工業化學品進口服務商，致力于為客戶提供高效便捷的服務，我司與國外70多家品牌生產商代理商建立長期的戰略合作伙伴關系，能夠快速幫助客戶解決實際問題保證、并且長期穩定為客戶儲備庫存，節約客戶等貨時間。涉及行業油：汽車行業、礦山行業、風電行業、紡織行業、石油開采、軌道交通、食品醫療、電子行業、船舶制造與維護保養、航空航天、電機軸承、潤滑系統、儀器行業。公司代理經銷品牌有：瑞士摩托瑞斯MOTOREX、尼科NYCO、克魯伯KLUBER、摩力克MOLYKOTE、魔力多MOLYDUVAL、科路德KLUTHE、福斯FUCHS、潘東興PENTOSIN、阿維亞AVIA、安潤龍ANDEROL、亞拉ARAL、雪弗龍Chevron、赤士頓CHESTERTON LE、勞勃抗LUBCON、好富頓HOUGHTON、嘉實多Castrol、魔力大MOLYDAL、羅哥ROCOL、凱密特爾Chemetall、等品牌潤滑油、潤滑脂、防銹油、磨削液、切削液、鋰基脂等。
公司：

Klüber Klüberplex AG 11-462

KlüberKlüberplexAG11-462是一種白色操作和底漆潤滑劑。

您的好處一目了然

- 減少維護需求

- 由于使用白色固體潤滑劑和低潤滑劑消耗，機器環境污染低

即使在低溫下也具有非常好的附著力

- 產品流線型可能，因為該產品適用于齒輪輪圈/小齒輪傳動和軸承

- 改進了組件性能

- 選擇固體潤滑劑和添加劑，減少磨損

- 因此，當暴露于鹽水時，具有非常好的防腐蝕性

您的要求 - 我們的解決方案

KlüberplexAG11-461和462提供非常好的磨損和腐蝕保護，有助于高負荷安裝和部件的高效運行。這些粘合劑潤滑脂已被證明有效多年，可在暴露于鹽水或長時間靜止時為組件提供可靠的保護。

應用

KlüberplexAG11-461和462設計用作齒輪輪輞和打印驅動器的起動潤滑劑，因此可用作驅動負載模式的對比潤滑劑。 KlüberplexAG11-在海上應用領域，船舶應用和風力發電站受鹽水，開式齒輪，低速滾動軸承，滑動和導軌，絞車或起重機鋼纜的影響。 461和462。

應用筆記

啟動潤滑

KlüberplexAG11-461和462通過刷子或刮刀施用。為獲得效果，我們建議在潤滑前清潔待潤滑的表面。要確定適合您的應用程序的數量，背面的圖表提供了指導值。

運行潤滑

KlüberplexAG11-461和462可通過手動操作的注油或適當的潤滑系統進行施工，并可在低至0°C的溫度下噴涂。吸入噴霧（參見SDS第2點）。如果確保足夠的再潤滑，則允許短至200°C的熱負荷。長時間暴露在強烈的陽光下可能會略微改變潤滑劑的表面顏色，而不會影響其性能。

Klüber Klüberplex AG 11-462 Is a white operating and priming lubricant.

Your benefits at a glance

– Reduced maintenance needs

– low contamination of machine environment due to use of white solid lubricants and low lubricant consumption

– very good adhesion even at low temperatures

– product streamlining possible as the product is suitable for gear rim / pinion drives and bearings

– Improved component performance

– less wear due to selected solid lubricants and additives

– very good corrosion protection also when exposed to salt water

Your requirements – our solution

Klüberplex AG 11-461 and 462 offer very good wear and corrosion protective properties contributing to an efficient operation of your highly loaded installations and components. These adhesive greases have proven effective for many years, providing reliable protection of components also when exposed to salt water or during extended periods of standstill.

Application

Klüberplex AG 11-461 and 462 have been designed as priming lubricants for gear rim and prinion drives and can also be used as contrast lubricant for checking the drive’s load pattern. In the offshore sector, marine applications and wind power stations subject to salt water, open gears, low-speed rolling bearings, sliding and guide rails, steel cables of winches or cranes and similar components can be effectively lubricated and protected using Klüberplex AG 11-461 and 462.

Application notes

Priming lubrication

Klüberplex AG 11-461 and 462 are applied by brush or spatula. For optimum results, we recommend cleaning the surfaces to be lubricated prior to lubrication. To determine the right quantity for your application, the diagram overleaf provides guide values.

Operational lubrication

Klüberplex AG 11-461 and 462 can be applied by manually operated grease guns or through appropriate central lubricating systems and are sprayable at temperatures down to 0 °C. When applied by spray, an exhaustion device is necessary in order to avoid inhalation of spray mist (see SDS point 2). Provided sufficient relubrication is ensured, short-term thermal loads of up to 200°C are lubricant quantities to be used depend on the operating conditions and must be determined for each application individually. Extended exposure to intense sunlight may slightly change the lubricant’s surface colour without affecting its performance.